All surfaces should be pre swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates. Remove any algae, lichen or moss using an appropriate decking cleaner. Wood that has been previously stained, painted or varnished should be stripped back to bare wood. Surfaces should be fully dry and clean. Apply 2-3 coats evenly along the grain, avoiding overlaps. Allow each coat to fully dry before reciting. Do not apply in temperature below 5, in damp conditions or rain.
All surfaces should be pre swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates. Remove any algae, lichen or moss using an appropriate decking cleaner. Wood that has been previously stained, painted or varnished should be stripped back to bare wood. Surfaces should be fully dry and clean. Apply 2-3 coats evenly along the grain, avoiding overlaps. Allow each coat to fully dry before reciting. Do not apply in temperature below 5, in damp conditions or rain.
Ronseal Hardwood Furniture Stain is designed to provide superior colour and protection for hardwood garden furnitureThe high quality oil-based...
£25.82Price
All surfaces should be pre swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates. Remove any algae, lichen or moss using an appropriate decking cleaner. Wood that has been previously stained, painted or varnished should be stripped back to bare wood. Surfaces should be fully dry and clean. Apply 2-3 coats evenly along the grain, avoiding overlaps. Allow each coat to fully dry before reciting. Do not apply in temperature below 5, in damp conditions or rain.
Write a review
Cuprinol Anti-Slip Decking Stain 2.5L Urban Slate
All surfaces should be pre swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates. Remove any algae, lichen or moss using an appropriate decking cleaner. Wood that has been previously stained, painted or varnished should be stripped back to bare wood. Surfaces should be fully dry and clean. Apply 2-3 coats evenly along the grain, avoiding overlaps. Allow each coat to fully dry before reciting. Do not apply in temperature below 5, in damp conditions or rain.